loading point
英 [ˈləʊdɪŋ pɔɪnt]
美 [ˈloʊdɪŋ pɔɪnt]
网络 载点; 负载点; 装载点; 加载点
双语例句
- This paper selects the scheme of strategic loading point of Linli station in Hunan Shimen to Changsha railway.
文章对湖南石长铁路临澧车站战略装车点方案设计进行了比选。 - Oil film velocity analysis in the thermal elastic hydrodynamic lubrication of heavy loading point contact
重载点接触热弹流润滑中油膜速度分析 - Give the seller sufficient notice of the vessel name, loading point and required delivery time.
给予卖方有关船名、装船点和要求交货时间的充分通知。 - Considering the system errors of gear drive and teeth synthetic flexibility, the loading point of bending strength was studied.
考虑系统误差和轮齿综合柔度，对齿轮弯曲强度的计算力点进行研究。 - The Shuttle accident, tunnel drilling equipment, mining equipment, cranes, leakage at the loading point of an offshore operation etc.
航天飞机事故，隧道钻探设备，小型设备，起重机，海岸渗漏等等。 - The winch was releasing two trams for goods loading, the loading point behind the temple of the funicular, Mu-Cha, Taipei.
大雄宝殿的索道装卸点。卷扬机正放下二节平车准备装货。 - Application of Mixed GA Based on the Best Loading Point in the Ship Loading of Military Equipments
基于最优装载点的混合遗传算法在军事装备船舶配载中的应用 - Study on the influencing factors of loading property for point supporting glass plate
点式支承玻璃板承载能力影响因素分析 - The document begins loading at this point.
文档在此时开始加载。 - Belt conveyor spillplate at stage loading point: novel design and application
驳运用驳船运送货物带式输送机转载点挡煤板的设计应用 - The result indicated that the fractal dimension difference of void distribution decreases with the increase of distance between the sampled depth and the loading point and an empirical equation was established.
结果表明，样品的孔隙分布分维差随着离施压点距离的增加而逐渐减小，从而得到了两者的关系方程。 - The application of loading point air velocity are also described.
简述载点气速的应用。 - This paper mainly discusses the two operating points for the test of synchronous machines, no-load point and zero power loading point.
本文主要对同步电机试验中的空载点和零功率负载点两个特殊工作点的运行工况进行了分析。 - Study on the Organization Program Tree for Through Goods Trains Originated at One Loading Point
始发直达列车组织方案树的研究 - The through goods train originated at one loading point is an important form for organizing wagon flow in our railway transportation.
始发直达列车是我国铁路采用的一种重要的车流组织形式。 - According to the characters of SHIMADZU electro hydraulic servo controlled fatigue testing machine and CT specimen, put forward a method based on compliance of stroke displacement which reflects the displacement of loading point at first time.
本项研究根据岛津液压伺服材料试验机和CT试样的特点，首次提出了基于通过测量反映加载点位移的试验机活塞位移的卸载柔度法来测量裂纹长度。 - The paper describes the problems of loading properties of point supporting glass with holes in glass building, displays some practical methods for calculating the bearing capacity of point supporting glass now, emphasizes difficult problems needed to study and solve afterward.
介绍了玻璃建筑技术中带孔点式支承玻璃承载力问题，列举了国内目前点式支承玻璃承载力一些计算方法，阐述了需要研究和解决的问题。 - From experimental test and finite element analysis it can be seen that the maximum value of local bending stress is observed at the loading point, related free edge and root part of the flange.
从实测结果与有限元分析结果得出了翼缘板的局部弯曲应力的最大值主要出现在载荷作用点及相应的自由边处和根部。 - Results: The stress was distributed to the mandibular, and increased along with the distance from the loading point;
结果：（1）所有载荷形式的各种应力值，随着单元距加载点的距离的增大，其应力值相对减小。 - Effect of loading point number;
加载支点数的影响； - The effects of strength anisotropy of soil, height of loading action point above the mudline and coefficient of friction of the soil-structure interface on bearing capacity of deeply-embedded large-diameter cylindrical structure are examined through comparative analyses.
进而通过变动参数的对比分析，探讨K0固结条件下软黏土不排水抗剪强度的各向异性、荷载作用点高度及结构-土界面摩擦折减系数等对大圆筒结构承载力的影响。 - At last, this paper analyzes the operation of strategic loading point implementation of Taiyuan Railway Bureau.
分析了太原铁路局实施战略装车点的运作情况。 - The results of fatigue tests indicated that the loading point deflection of the test specimen in fatigue process experienced three increasing stages. They are rapid growth stage, smooth growth stage and a second rapid growth stage until failure. 3.
疲劳实验结果表明蜂窝夹芯板四点弯曲疲劳过程中加载点挠度的增长经历了三个阶段，即挠度快速增长阶段、挠度平稳增长过程和再次快速增长直至破坏。 - Along the loading direction, compressive stress decrease gradually from loading point, perpendicular to loading direction, stress shows a bell shape distribution. The maximum tensile stress appears at loading point below.
沿加载轴方向压应力自加载点逐渐减小，垂直于加载轴方向，应力呈喇叭状，最大拉应力出现在加载轴上加载点下方。 - Finally, according to this model I solve a system solution of the optimal strategy loading point.
最后，基于模型求解了某车务部门战略装车点的最优数量。 - The main results we obtained are as follows. ( 1) Under constant normal stress and loading point velocity in shear direction, the sample shows regular stick-slip behavior, i.e. stick-slip events with similar stress drop and period, as the displacement gradually increases.
获得的主要结果如下：（1）在恒定的正应力和剪切方向恒定的位移速率下，随着位移的逐渐增大，标本表现出较为规则的粘滑，即粘滑事件的应力降相差不大。 - Through the finite element analysis, the stress contours and the last damage states of the four connections in the cycle load are gained, and the load-displacement hysteretic curve, skeleton curve and main performance parameters in the loading point are analyzed.
通过有限元分析得到四种节点在循环荷载作用下的应力云图和最终破坏形态，分析了加载点的荷载位移滞回曲线、骨架曲线和主要的性能参数。 - The stress intensity factor of twin cantilever beam can be approximated by a periodic function under tensile step load. The change cycle is as the same as the displacement cycle of loading point, and is a function of prefabricated crack.
双悬臂梁DCB试样模型在拉伸阶跃载荷的作用下，应力强度因子的动载系数可以近似用一个周期函数表示，它的变化周期与载荷加载点的位移变化周期相同。